Spreadsheets

Eurocode 7 Slope Stability Analysis Excel Calculator (Simplified Bishop Method & Automated Slip Circle Grid Search)

39 $

What's Included

Eurocode 7 geotechnical slope stability calculation workbook implementing the Simplified Bishop Method of slices for circular slip surfaces in accordance with EN 1997-1:2004+A1:2013 and BS EN 1997-1:2024. Incorporates a two-level automated grid search evaluating 242 trial circular slip surfaces (11×11 coarse grid and 11×11 fine grid) to determine the governing critical failure circle and minimum Over-Design Factor (ODF).

  • Design Standards: EN 1997-1:2004+A1:2013, BS EN 1997-1:2024, EN 1990:2002+A1:2005
  • Design Approaches: DA1-C1, DA1-C2 (A2+M2+R1), DA2, DA3 partial factor sets
  • Analysis Engine: Simplified Bishop Method of Slices with iterative moment equilibrium (ΔF < 0.001)
  • Search Capability: 242 automated trial slip circles with native cross-section plotting
  • Format: Open Excel Workbook (.XLSX) with native formulas (no external add-ins required)

Instant Digital Access

Direct file download immediately after checkout. Access anytime under My Account.

Verified & Standard Compliant

Spreadsheets, tools, and code templates are fully tested for technical accuracy.

Dedicated Support

Direct technical assistance via Telegram @hungthinhvn or Email hangchat.xyz@gmail.com

Product Description

Product Overview

This geotechnical calculation workbook performs limit equilibrium slope stability analyses for circular slip surfaces based on the Simplified Bishop Method conforming to Eurocode 7 (EN 1997-1). Designed for geotechnical and civil engineers evaluating cut slopes, highway embankments, dam embankments, and slopes supporting structural footings, the spreadsheet automates slice discretization, pore pressure modeling, and critical slip circle location via a two-level grid search without requiring commercial slope stability software.

Building Standards: EN 1997-1 • BS EN 1997-1 • EN 1990
Calculation Core: Simplified Bishop Method of Slices
Units: SI Metric (m, kN/m³, kPa, deg)
Delivery: Excel .XLSX + Open Native Formulas

Calculation Capabilities & Technical Scope

The spreadsheet incorporates formal limit equilibrium equations and Eurocode 7 verification rules across distinct geotechnical modules:

ModuleEurocode 7 ClauseEngineering Scope & FormulationVerification Criteria
Eurocode 7 Partial Factor SetsEN 1997-1 Table A.3, A.4, A.14Selectable Design Approaches: DA1 Combination 1 (A1+M1+R1), DA1 Combination 2 (A2+M2+R1), DA2 (A1+M1+R2), and DA3. Factoring of geotechnical parameters (γφ’ = 1.25, γc’ = 1.25, γγ = 1.0) and structural surcharge loads (γG = 1.0/1.35, γQ = 1.30/1.50).GEO Limit State Factoring
Simplified Bishop MethodEN 1997-1 §11.5.1 / ISO 22477Moment equilibrium formulation satisfying vertical force equilibrium on individual vertical slices. Iterative solution for factor of safety F: factor mα,i = cosαi(1 + tanαitanφ’d/F) evaluated across all slices until convergence |ΔF| < 0.001.Iterative Moment Equilibrium
Two-Level Slip Circle SearchEN 1997-1 §11.5.1Level 1 Coarse Search (11×11 = 121 trial circles) spans center range [xtoe ; xa] and elevations [ymin ; ymax]. Level 2 Fine Search (11×11 = 121 trial circles) refines around coarse minimum with sub-meter increments (ΔX, ΔY) to pinpoint critical center (X0, Y0) and radius R.242 Trial Slip Surfaces
Surcharge & Footing ModelingEN 1997-1 §2.4.7.3 §11.5Applies uniform foundation surcharge qk with variable action fraction χQ: design load qd = qk·[(1−χQ)γG + χQγQ]. Discretizes additional slice vertical load Pi based on foundation width W and setback distance from slope crest D.Surcharge Setback & Width
Stratigraphy & Pore PressureEN 1997-1 §11.5.1(4)Multi-layer soil profile support with individual layer unit weights (γ’, γsat), effective cohesion c’, and friction angle φ’. Pore water pressure incorporated via pore pressure ratio ru = uibi/Wi or explicit groundwater piezometric level.Multi-Layer & ru Ratio
Over-Design Factor (ODF) CheckEN 1997-1 §2.4.7.3.1Verifies design resistance against design destabilizing actions: Over-Design Factor ODF = Rd / Ed ≥ γR;e = 1.00. Automatic compliance status reporting ([Pass] / [Fail]) on the executive summary sheet.ODF ≥ 1.00 [Pass]

Failure Modes & Theoretical Criteria

Slope Circle Failure Mode

Slip surface emerges on the slope face above the toe. Governs for steep slopes where the inclination angle β is less than the critical toe inclination βtoe (default 53°).

Toe Circle Failure Mode

Slip arc passes directly through the toe of the slope. Characteristic of homogeneous cohesive-frictional soils under moderate slope angles.

Deep-Seated Base Circle

Slip surface penetrates deep into underlying strata below the toe level. Critical under heavy foundation surcharges q or where soft cohesive strata underlie the embankment base.

Native Dynamic Cross-Section Plot

Integrated Excel scatter plot displays the ground terrain line, surcharge footing block, slice boundaries, rotation center O1, radius vector R, and the critical failure arc.

Worksheet Screenshots

Printable calculation views exported directly from the calculation sheets:

Eurocode 7 Slope Stability Design Report and Cross Section Plot
Figure 1: Executive Design Report sheet displaying failure criteria schematics, input parameters, governing Bishop equation, and the cross-section plot of the slope with footing and critical slip circle.
Eurocode 7 Geotechnical Partial Factors and Stratigraphy Input
Figure 2: Input data setup displaying Eurocode 7 partial factor sets (DA1-C1, DA1-C2, DA2, DA3), soil stratigraphy table with layer bounds, and derived geometry coordinates.
Simplified Bishop Method Slices Mathematical Formulation
Figure 3: Step-by-step mathematical formulation of the Simplified Bishop Method of Slices, including vertical equilibrium, pore pressure ratio ru, and iteration threshold rules.
Automated Grid Search Matrices for Critical Slip Circle
Figure 4: Two-level grid search: 11×11 coarse search matrix establishing trial bounds, followed by an 11×11 fine search matrix converging to the critical rotation center.
Slope Stability Grid Search Worksheet Matrix
Figure 5: Dedicated Grid Search worksheet evaluating 2D trial slip circles with computed factor of safety values and automated minimum boundary checks.

Building Code Standards & Regional Applicability

Partial factors, combination rules, and equilibrium limits align with national geotechnical practice across Europe and international jurisdictions:

Region / StandardNational Annex & Design ApproachGeotechnical Scope
United Kingdom & IrelandBS EN 1997-1:2004+A1:2013 / BS EN 1997-1:2024 (DA1)DA1 Combination 2 governs overall stability and slope verification with material factor set M2.
Germany & AustriaDIN EN 1997-1 / DIN 1054 / ÖNORM EN 1997-1 (DA2 / DA3)Applies resistance factoring on total shear resistance or material factoring under Design Approach 3.
France & Southern EuropeNF EN 1997-1 / NF P 94-282 (DA3 / DA1)Employs geotechnical material factors on friction tanφ’ and effective cohesion c’ for embankment stability.
Nordics (Denmark, Norway, Sweden)DS/EN 1997-1 / NS-EN 1997-1 / SS-EN 1997-1 (DA3)Design Approach 3 with consequence class adjustments applied to overall slope and excavation verification.
International EPC ProjectsISO 22477 / Eurocode 7 BaselineIndependent verification of slope stability calculations performed in commercial limit equilibrium software.

Spreadsheet Notes & Engineer Responsibility

  • Transparent Open Formulas: Cell calculations are fully exposed using standard native Excel formulas. No macros or external DLL add-ins are required.
  • Automated Convergence: The Simplified Bishop iterative loop converges automatically within the worksheet calculation cycle until the change in factor of safety is below 0.001.
  • Geotechnical Site Characterization: Representative soil parameters (γ, c’, φ’), pore pressure distributions (ru), and geotechnical stratigraphy must be established from site investigation and laboratory testing by the geotechnical engineer of record.

Package Contents

  • Archive File: Eurocode-7-Slope-Stability-Analysis-Calculator.zip (3.36 MB)
  • Included Workbook: Slope Stability Analysis Eurocode 7 (EN 1997-1).xlsx (Full calculation sheets: Design Report, Analysis, Grid Search)
  • Delivery: Instant Google Drive direct download link provided upon checkout.

Instant Access
39 $
2

24/7 Technical Support

● Online • 24/7 Support

Please introduce yourself to start chat

24/7 Technical Support
Hello! 👋 How can I help you today?